economic type temperature and humidity test chamber SH

Computer temperature and humidity controller with high-precision display and control of temperature and humidity;
Parameter setting by simple operation of up and down key, convenient for user’s operation.
Panel correction function of temperature and humidity avoids the inconvenience caused to operators by display deviation.
Super large observation window to observe the status of samples.

Features:

Standard Configuration

Model	SHO1	SH02			SH05
Performance
System	Balanced temperature & humidity control system
Temp.range	R.T+10～100℃
Humid. range	60～98%RH
Temp.constancy	±0.5℃
Temp. uniformity	≤±2.0℃
Humid. uniformity	≤>+2/-3%RH
Composition
Exterior material	Electrostatic spraying of epoxy powder on cold-rolled steel sheet
Interior material	Stainless steel plat(sus304)
Heat insulation material	Rigid polyurethane foam+glass wool
Observation window	Rectangular hollow glass
Cable hole	Inside diameter Φ50
Heater	Iron-chrome wire heater
Humidifier	Stainless steel sheathed heater
Circulating fan	Multi-wing centrifugal blow fan
Motor	Condenser type
Caster wheel	Lockable caster wheel
Controller
Temp. setting method	Digital setting by key
Temp. controll method	Fuzzy control
Operation function	Fixed temperature operation
Water supply
Water supply method	Water pump out system
Add water entrance	Water entrance after the chamber
Storage water tank	Stailess steel water tank
Safety devices
Independence overtemp. protector,/water level protector/over /Leak electricity protector
Standard
Interior dimensions	400×450×650mm		500×550×700mm	700×800×900mm
Exterior dimensions	880×610×1020mm		950×710×1370mm	1150×960×1620mm
Internal volume	Approx 100L	Approx 200L		Approx 500L
Power	Approx 2KW	Approx 2.5K		Approx 3KW
Power Supply	220V,50HZ
Accessories
Cable hole lid(Φ50),1pcs/Shelves plate,2pcs/ waterpipe, 1pcs/ lamp,1pcs/Product description ,1set
Optional Accessories
Recorder/Communications interface(rs232 or rs485)

The performance shown here is the value under the condition of the ambient temperature of 23°C±2°C, humidity of 65%RH±20%. And there is not burden.
The projection is not included for Internal dimensions and External dimensions.