Technical Characteristics:
Analysis by flame and graphite furnace methods, it is automatically controlled by a computer through the workstation software.
6 lamps whose positions can be set automatically by the computer.
Advanced optical design with a grating of 1800 lines/mm and continuously adjustable slits from 0.1 to 2.0 nm.
The gases are provided through a computerized control system to automatically switch between acetylene and nitrous oxide gases.
Excellent sensitivity: greater than 0.8 ABS for the analysis of 5 ppm copper solution with ordinary atomizer, and can achieve 1.45 ABS if a high performance atomizer is used.
Equipped with all safety interlocks. Two separate full titanium burner heads: acetylene and nitrous oxide, are provided for protecting them from corrosion.
Optional, the flame and furnace method autosampler.
A suspension design for the optical system. Resistance to shaking of the bench or temperature change which otherwise effects the instrument's stability.
Carefully designed deuterium lamp background deduction andself-absorption background deduction , to make calibration results more accurate.
It optimizes the power supply techniques to prolong working life of lamps.
Safe and reliable control alarming devices, to assure over-current protection for hollow cathode lamps, insufficient pressure protection for combustion gas/protection gas,
alarming for leaking of combustion gas, over-heated protection for graphite furnace.
Be able to be coupled with the hydride generator, which is heated quartz cell, 3 channels continuous sample pumping by a peristaltic pump.
the generator is capable of automatically perform high sensitivity ultra trace analysis for 8 elements (As, Se, Hg, Pb, Bi, Sb, Sn and Te) in one single system.
Optional of graphite furnace and flame autosampler, realizing automatic preparation of standard solutions, to automate the analysis process.
Easy to switch between flame and graphite furnace in 1 second.
Safety improvement with seal-water for the flame: a sensor and solenoid valve control is provided in the seal water bucket, it safeguards the ignition of flame to prevent the acetylene leaking due
to water shortage of seal-water.
The height of the burner head is adjustable automatically in searching the most optimized position.
Improvement with the calibration curve algorithm, be more flexible and accuracy.
Improvement of self absorption background deduction was accomplished. Also the improved D2 lamp background deduction is provided.
A new stylish chasis is provided.
Technical Characteristics:
Wavelength Scope: 190nm ~ 900nm
Spectrum Bandwidth: Automatic Switch in 5 levels:
0.1nm, 0.2nm, 0.4nm, 1.0nm, and 2.0nm, respectively
Mono-Chromator: C-T Grating Mono-Chromator
Wavelength Repeatability: Full Wavelength≤+ 0.1nm
Grating: 1800 lines/mm
Accuracy: Full Wavelength ≤+ 0.2nm
Focal Distance: 300mm
Blaze Wavelength: 250nm
Resolution: Better than 0.3nm
Static Baseline Stability: ≤+ 0.002 A/30min
Dynamic Baseline Stability: ≤+0.004 A/30min
Background Calibration: >50 times
Burner Position Adjustment: Adjustable of Height and Angles. Flame/Hydride Can be Switched in 1 minute
Burner Head: Interchangeable Full Titanium Burning Heads of 50mm and 100nm, Full Titanium Nebulizer
Flame Method:
RSD: ≦1%
Limit of Detection: ≤ 0.005mg/L
Benchmark of Cu: ≤ 0.02mg/L/1%
Graphite Furnace Method:
Benchmark Concentration of Cd: 0.5x10-12g
Limit of Detection: 1x10-12g
Temperature Range: Room Temperature ~ 3000℃
Temperature Control Program: Max 20 Step Temperature Rising Program.
3 Modes of Temperature Rising: step, slope, and flat, respectively
Graphite Furnace Repeatability: 3ug/L Cd 11 injections, RSD≤2%
Temperature Rising Speed: ≥2000℃/second
Dimensions: 880mm (L) x 540mm (W) x 450mm (Height)
Weight: 125 Kg
Power Supply: ~220V 50Hz Single Phase
Power Consumption: 220W
Complete Set of AAS:
1. Main Unit (Any Model)
2. PC and Workstation Software are included
3. Gases: Air, Ar, Acetylene (Optional), Nitrous Oxide Gas (optional)
4. Element Lamps (based on your selection)
5. Hydride Generator (Optional)
6. Auto-sampler for Flame, or Graphite Furnace (Optional)
7. Water Cooling Chamber for Graphite Furnace (Optional)
8. Spare Parts
|
spectral and optical systems 
